Block Paving Driveways Southend

Get An Online Estimate

Or Call: (020) xxxx–xxxx

The majority of people opt for a block paving driveway. Block paving has several advantages over other driveway components, such as gravel or concrete, including cost-effectiveness and durability. If you don’t know what you’re doing, however, installing block pavement may be difficult!

In this article, we’ll look at how block paving firms use appropriate processes and tools, as well as who provides the most labour in your region. Before having your driveway paved with bricks, keep these things in mind.

Concrete or crushed rock mixed with sand, cement, and water is used to construct pavements. The blocks are frequently produced from concrete or crushed stone with sand, cement, and water.

Blocks are often made of composite materials, which are more durable and sturdier than wood. Other components may include salt to lower the freezing point and little stones to reduce weight.

Concrete paving is a popular choice for driveways, sidewalks, and verandas. It’s an excellent option for high-traffic outdoor spaces since it can handle the elements.

Advantages of Block Paving Driveways

A surface that can endure all types of weather and has the potential for significant snow throughout the year. The following are some of the advantages:

  • It’s inexpensive.
  • Paver blocks are simple to install and require a spade, wheelbarrow, and concrete tamping rod to complete the job.
  • Paving stones may be used for various applications, including home renovation projects since they can be installed on virtually any surface contact.
The Block Paving Process

Because we must lay a compressed gravel base over an even surface of stone bricks or slabs to create new parking lots, walkways, and sidewalks, most pavements constructed from compacted gravel are known as “paving above the ground.”

The following are the materials used to make paved block areas:

  • Natural stone.
  • Concrete pavers
  • Cobblestones
  • The bricks are embedded in a sand-cement mortar with asphalt covering.

Hand-laying block paving is done one block at a time. On the other hand, we utilize sophisticated gear to install them as a specialist block paving business.

These systems build many layers of cement paver pieces on a prepared surface to form a cohesive road surface. This shortens the installation time and minimizes labour requirements, lowering expenditure.

  • Creating holes in the hard ground with a hammer drill is very effective.
  • Begin by cleaning the area around the hole with a washcloth or towel to eliminate any trash that may have fallen in.
  • The chisel’s square tip is used to cut block edges so we can firmly insert them.
  • After that, a paintbrush is used to apply the sealant to the gaps and seams between the blocks’ surfaces.
  • A block cutter, a block extractor, and a block knife are included as standard.
  • The sub-base is recharged with gravel using a shovel or other implement after block paving.
  • Batty wooden block spacers, often known as “bats,” are utilized to make little spaces between your blocks while they’re being positioned – because it gives a more uniform appearance when all of the pieces are!
Block Paving Installation Steps
  • First, we’ll need to take readings, choose a spot, and clean the site of any dirt particles.
  • Finding the best sub-base depth is simple. It’s usually about 17cm below the surface.
  • Before starting the first block, install wooden spacers to create a little space between it and the second block, ensuring enough distance between them for the following column and then adding more woodblocks to finish off the room.
  • We maintain a distance between each row.
  • We guarantee that the blocks are positioned reliably. (We supply the correct number of blocks for your project and have them on-site to avoid difficulties.)
  • The iron roller is utilized to compact the bricks, which are pressed in a gradual, uniform manner across the whole surface and rolls smoothly and gently to avoid damage.
  • The block must be compressed to a sufficient degree before the gaps between individual bricks are eliminated, and they may then be hit together with a “clunk.”
  • To get the desired balance, we may gradually mix concrete mixtures (mixture) with cementitious materials (blend) with water. We may pour this mix over block foundations and blocks built on top of another block by combining mortar and pouring it onto the base.
  • Allow for at least 24 hours before continuing. Spread the mortar with a hand trowel or masonry knife, carefully laying it until it is half an inch thick. If you’re employing several layers for your job, wait between block layer applications.
  • Ceramic tiles are not used on water-based tiling because the mortar must flow down into the gaps between the bricks and level out over time as the weight of other blocks compresses them.
  • Make rows all down one side, and then go ahead to get the most out of your room.
  • When laying down blocks, utilize firm but not hard push blocks rather than force. Block paving in the United Kingdom is a precise and time-consuming task.
  • Avoid producing compound edges when putting blocks together.
  • Use block-corner abrasives on the corners if the surface is still rough; otherwise, take care of the joints by hand or with a shovel. 

If you need help with anything else please feel free to call us on

020 xxxx xxxx